When it comes to woodworking, there is an abundance of tools that can prove to be useful in more ways than one, such as the best belt sander. Whether you are a beginner or an expert, you need to be familiar with how to use these tools properly to achieve the best outcomes. Luckily, using woodworking tools can be easy.
If you are interested to know how to use a wood router, this guide can help you. I will briefly tackle some of the simple steps that are involved in the task, while also providing you with practical tips on how you can do it like a pro. By the time you are finished reading, you will be ready to handle a wood router.
What You Will Need to Follow this Tutorial
To follow the steps that will be outlined in the next part of this post, here are the materials that you will need:
· Router bits
Step-by-Step Guide on How to Use a Wood Router
Before reading the steps below, keep in mind that there are different types of routers that are available, including those shown in the short video below:
Once you have gathered the materials that will be needed for this task, here are the steps that you should follow to complete the job.
1. Install Router Bit
The first step is the installation of the router bits. To do this, loosen the collet by turning it counter-clockwise. Proper installation of the bits is a crucial concern since it will contribute to the smooth functioning of the wood router. To make things easier for you, remove the router base first. Once you have installed the bits, tighten the collet, and you are now ready to proceed.
More than the proper installation of the bits, emphasis should also be on the right bits to use. You can choose from ¼ or ½ inch. There is no wrong or right answer as the choice will depend on the project that you are completing and the router that you are using.
Aside from the size, router bits are also classified based on their construction. The cheap ones are high-speed steel. As much as possible, stay away from the latter. The better choice would be carbide-tipped bits, although they can be more expensive.
2. Secure the Material
The next step is to position the wood in such a way that it will be secured in place. The least that you would surely want is for the material to be constantly moving while you work, which will inevitably affect the outcomes. It will be a good idea to have it clamped so that it won’t end up shaking or moving regardless of the pressure that is applied to it.
3. Get Ready to Work
Now that the bits are installed and the material is secured in place, the next thing that should be ready is you – the one who will be doing the work. The router can be loud, so do not forget to add protection for the ears. To add, it can create dust from the wood that can affect your vision, so wear goggles.
4. Start Routing
This is the main part of the task and also the most crucial. Plug the router and by now, you can start working. Nonetheless, it is not as easy as directing the router in whatever direction you please. You need to be organized and consistent in the movements that will be made.
Before you begin, choose the right speed of the wood router. I cannot say which speed is the best since I do not know the type of router that you have. The decision on the speed of the router will depend on factors the material and the size of the router bits that you are using.
One of the most important things is to make sure that you are moving in the right direction. The technique here is that you should move the router against the direction where the bit is rotating. This will provide you with better control. It also prevents the router from climb cutting.
Once you have covered the entire area that you would like to work on, your work is done. Remove any dust that has remained on the surface. Keep on routing if you are still not satisfied with the outcomes of your work.
To make the most out of the wood router and to ensure superior outcomes, below are some of the most important tips that you have to keep in mind:
· Always use sharp and high-quality bits. Stay away from cheap ones. If you use good bits, there is also a lower likelihood of splinters. You do not need to purchase the most expensive bits, but at the very least, make sure of their decent quality.
· The same with the bits, choose the right tool. Read best wood router reviews online and this can help you make a well-informed decision. Many types and brands are available, so make sure to choose wisely. Pick one that is easy to handle or control, while guaranteeing exceptional outcomes.
· When using a router, it is also good to follow the direction of the grain rather than going against it.
· If you cannot clamp the material, it would be best to at least put a mat underneath. This will create a sort of friction and will prevent the wood from moving as you rout.
As shown in this guide on how to use a wood router, the process is pretty much straightforward. There is actually nothing to worry about if you have the right tool, and most importantly, if you are aware of the right techniques.
Have you tried using a wood router before? Did you enjoy reading this post? Is there anything else that you would like to add? Do not hesitate to write a comment below.
Share this Image On Your Site
Read more: How to Refinish Kitchen Cabinets